top of page

Journal Papers 

  1. A. Shanmuga Sundaram and R.Velraj,’Thermal management of Electronics: a review’, Journal of Thermal Science, Vol. 12 (2008), pp. 5-26.

  2. A. Shanmuga Sundaram, R.Velraj and G.Suganaya,’Experimental investigation of transient characteristics of a heat pipe’, Journal of  Heat and Technology, Vol.27(2009),pp.29-35.

  3. A. Shanmuga Sundaram and Velraj R., ‘An experimental investigation on passive cooling system incorporating phase change material and thermosyphon heat exchangers for telecom shelters’, Journal of Energy and Buildings, Vol.42 (2010), pp. 1726-1735.

  4. A. Shamuga Sundaram and B.Anirudh, ‘Thermal Modeling of Thermosyphon Integrated Heat Sink for CPU Cooling’, Journal of Electronics Cooling and Thermal Control, Vol.1 (2011), pp.15-21.

  5. R.Shanthi, A.Shanmuga Sundaram and R.Velraj, ‘Heat transfer enhancement using nanofluids- an overview’ Journal of Thermal Science, Vol. 16 (2012), pp. 423-444.

  6. A. Shamuga Sundaram and B.Anirudh, ‘Thermoeconomic analysis of heat pipe heat exchanger for waste heat recovery in thermal systems’, Int. Journal of Exergy, Vol. 11 (2012), pp. 35-51.

  7. A. Shamuga Sundaram and B.Anirudh, ‘Performance evaluation of thermoyphon integrated heat sink for CPU cooling’, Frontiers in Heat pipes, Vol 3, No. 1, 2012.

  8. A. Shamuga Sundaram and B.Anirudh, ‘Experimental investigation on thermoyphon integrated heat sink for CPU cooling’, International Review of Mechanical Engineering, Vol. 06 (2012), pp. 1-15.

  9. A.S hamuga Sundaram, B.Anirudh and A.B.K.Rajan,’,Experimental Investigation on Thermosyphon Heat Sink Integration Technology for CPU Cooling’, International Review of Mechanical Engineering, Vol. 6 (2012), pp.871-885.

  10. A. Shamuga Sundaram and B.Anirudh,’ Optimum insulation thickness of walls for energy saving in hot regions of India’, International Journal of Sustainable Energy, Vol. 33 (2013), pp. 213-22.

  11. A. Shanmuga Sundaram, M.Rajmohan ,R.Adalarasan and  M.Santhanakumar, ‘Optimization of Weld Characteristics of Friction Welded Al/SiCp Composites using Grey Relational Analysis and Principal Component Analysis’ Wulfenia ,Vol.20(2013),pp.422-433.

  12. A. Shanmuga Sundaram, R.Adalarasan and M.Santhanakumar, ‘Optimization of weld characteristics of friction welded AA 6061-AA 6351 joints using grey-principal component analysis (G-PCA)’ Journal of Mechanical Science and Technology, Vol. 28 (2014), pp.301-307.

  13. A. Shanmuag Sundaram ,R. Adalarasan and  M. Santhanakumar, ‘Optimization of friction welding parameters for AA6061-T6 / AA2024-T6 joints using Taguchi-Simulated annealing (TSA) algorithm’, Applied Mechanics and Materials,(2014),pp.592-594

  14. DOI: 10.4028/www.scientific.net/AMM.592-594.595

  15. A. Shanmuga Sundaram and S.Suresh,’Dielectric properties of lead sulphide thin films for solar applications’, Chalcogenide Letters.Vol. 11 (2014), pp.159-165.

  16. A. Shanmuga Sundaram and S.Suresh,’ A Study of Mechanical Behaviour of Anilinium D-Tartrate Single Crystal’, International Journal of Materials Engineering, Vol.4 (2014), pp.70-74.

  17. A. Shanmuga Sundaram and S.Suresh,’ A brief review of the relevant dielectric theories of solids,’ Latin-American Journal of Physics Education, Vol.8 (2014), pp.397-406.

  18. A. Shanmuag Sundaram and R. Adalarasan,‘Parameter design in friction welding of Al/SiC/Al2O3 composite using grey theory based principal component analysis (GT-PCA)’,Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.37 (2015), pp.1515-1528.

  19. A. Shanmuag Sundaram and R. Adalarasan, ‘Parameter design and analysis in continuous drive friction welding of Al6061/SiCp composites’, Journal of Mechanical Science and Technology, Vol.29 (2015), pp. 769-776.

  20. A. Shanmuag Sundaram and Kuber Nath Mishra,’Optimum Insulation Thickness of Roof for Energy Saving in Hot Regions of India’, International Energy Journal, Vol.15(2015), pp.9-20.

  21. A. Shanmuag Sundaram and R. Adalarasan, ‘Study of friction welding characteristics of Al/SiC composite and application of grey-based TOPSIS’, Journal of the Chinese Institute of Engineers, Vol.39 (2016), pp. 484-492.

  22. A. Shanmuag Sundaram,R. Adalarasan and  M. Santhanakumar, ‘Investigation in solid-state joining of Al/SiC/Al2O3 composite using Grey-based desirability (GBD) and response surface plots’, Journal of the Chinese Institute of Engineers, Vol.(2017), pp.55-65.

  23. A.Shanmuga Sundaram and A.B.K. Rajan,’ Post Harvest Management of Fruits and Vegetables in India: Past, Present and Future’, Taga Journal, Vol.17 (2018), pp.2385-2414.

  24. A. Shanmuga Sundaram, P. Pathmanaban and BK. Gnanavel,’Recent Application of imaging techniques for Fruit quality Assessment’, Trends in Food Science & Technology’, Vol.94 (2019), pp.32-42.

  25. A. Shamuga Sundaram, Shanthi R., Seeniraj R.V. and Velraj R., ‘An experimental study of heat transfer characteristics of a flux controlled thermosyphon filled with R134a’, Journal of Applied Thermal Engineering (communicated).

  26. A. Shamuga Sundaram, Shanthi R., Seeniraj R.V. and Velraj R., ‘An experimental study of heat transfer characteristics of a temperature-controlled thermosyphon filled with R134a’, Journal of Heat and Fluid flow (communicated).

Citation Analysis

bottom of page